Inoform F5C

CURTAIN WALL FACADE

The basic curtain wall facade with 50 mm profile depth.

The curtain wall attaches to the outside of the floor slabs, acting as a “curtain” that is literally hung on the building and therefore, non-load bearing. It spans slab to slab, and systems are most often constructed in one of two ways; stick-built or panelized.

With a stick-built curtainwall, components are sent directly to the job site where they are assembled in the field before they can be installed.

A panelized curtain wall is made up of prefabricated units built in a controlled shop environment. The units are sent to the field ready to be anchored at the floor slabs.

Description

PRODUCT DESCRIPTION

  • Suitable for vertical facades, pitched roofs, pyramids and conservatories.
  • Great for architectural designs for aluminium and glass.
  • Angle joints for free shaping.
  • Identical mullion and transom cross-sections.
  • Large choice of opening elements.
  • Thermal insulation for minimal heat transfer.

PERFORMANCE CHARACTERISTICS

  • Water tightness (EN 12208) 9A
  • Air permeability (EN 12207) AE
  • Burglar resistance (EN 1627) RC2
  • Wind load (EN 12210) C5 / B5
  • Soundproofing (EN 10140) 38 dB
  • System depth 50 mm

Ask us about this product